Goldring 2300 MI(MM)

Hifistasjonen
Trenger du hjelp eller veiledning? Ta kontakt.
Besøk vår butikk.
4.130 kr

Denne varen kan også kjøpes i vår butikk.
Detaljert beskrivelse

Goldring 2300 MI, Moving Iron, skal brukes på MM inngangen på ditt riaa trinn. Goldring 2300 MI bruker en Fritz Gyger 2 fine line slipning på stylus som gir deg enda bedre oppløsning, detaljer og nyanser i forhold til elliptisk slipning. Goldring 2300 MI er en pickup som passer de aller fleste tonearmer. Er du usikker, ta kontakt med Hifi Stasjonen så får du hjelp til å finne ut hvilken pickup som passer din tonearm. NB: Hifi Stasjonen anbefaler ikke flytende rensemiddel til stylus. Ved bruk av flytende rensemiddel på stylus frafaller all garanti/reklamasjon. Hifi Stasjonen hjelper deg med godkjente støv og skittfjerningsprodukter for stylus. Fra Goldring Webside : All Goldring 2000 series cartridges feature Moving Iron technology. This lends them the high levels of detail associated with more expensive moving coil designs whilst retaining the convenience of a replaceable stylus and high output associated with moving magnet types. The cartridge employs a fixed samarium cobolt magnet and high output coil combination so that a very light iron/nickel cantilever end-piece can be used instead of the much heavier permanent magnet used in conventional designs. This reduces the moving mass of the cartridge allowing the stylus to trace the record groove more faithfully. Because of their high output, Goldring 2000 series cartridges should be used with the standard moving magnet phono input of an integrated amplifier. Use of the acclaimed Gyger II fine line diamond offers high clarity and excellent tracking ability. This record cartridge will upgrade many mid-range turntables, allowing them to produce an even finer sound. Spesifikasjoner : Frequency Response 20 Hz - 20kHz +/- 3 dB Channel Balance within 2 dB @ 1 kHz Channel Separation better than 20 dB @ 1 kHz Sensitivity 6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec Static Compliance 35 mm/N Dynamic Compliance @ 10 Hz 16 mm/N Vertical Tracking Angle 24° Stylus Radius Gyger II Stylus Type Replaceable Load Resistance 47 kΩ Load Capacitance 100 - 200 pF Internal Inductance 680 mH Internal Resistance 550 Ω Cartridge Mass 7.4 g Cartridge Mass ( inc. fixing screws) 8.6 g Fixing Centre 0.5" (12.7 mm) Playing Weight 1.5 - 2.0 g (1.7 g nom.)